The xps extruded board fixed with galvanized mesh can achieve a relatively firm and stable effect, and can also greatly improve the prevention of cracking, mortar layer falling off and other situations. Of course, such construction also has certain shortcomings, that is, it is expensive.
To put it openly, with galvanized mesh as fixation for extruded boards, then what we need to consider is how to fix the galvanized mesh more firmly. The fixation of simple extruded boards usually uses insulation nails, 4 per square meter. When using galvanized mesh, most use expansion screws for fixation, and galvanized mesh and expansion screws are fixed by electric welding, which can form a relatively firm wall.
In order, it is base leveling, bonding mortar layer, galvanized mesh bracket and extruded board, galvanized mesh installation, anti-crack mortar layer, surface layer (real stone paint or other coatings). The above steps are the specific construction process. Of course, there are many steps in construction that require on-site intervention, such as plumb bob vertical, leveling, straightedge checking plane, bonding mortar ratio, etc. These are all links that require specific operation outside the main process, and will not be repeated here.
Our company has a complete construction process, specific to each link, which can be obtained by contacting our company. Of course, the construction operation of extruded boards needs to be completed according to drawings and design requirements, and cannot completely refer to the Internet.
Provide everyone with an effective method. Before the extruded board construction on the external wall, select a certain wall for sample construction. After the construction is completed, find the supervisor and the owner to confirm the construction plan. This can control the entire construction process and direction, and also avoid the occurrence of some wrong construction.
The above information is for reference only. If you need a specific construction process, please consult us.
English